EasyManuals Logo

Xerox Color 550 User Manual

Xerox Color 550
274 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #228 background imageLoading...
Page #228 background image
Note
The machine will not operate if the cover is open even slightly.
Paper jams at the optional booklet maker tray
1. Make sure that the machine has stopped printing.
2. Open the Right Cover on the finisher.
3. Turn knob 4a and remove any jammed paper from the optional booklet maker tray.
Note
If paper is torn, check inside the machine and remove it.
4. Close the Right Cover on the finisher.
Note
A message will display and the machine will not operate if the right cover is open even
slightly.
Stapler faults
Follow the procedures provided when the output is not stapled or the staples are bent.
Contact our Customer Support Center if the problem persists after you have tried the
following solutions. Stapler faults on output may look similar to the ones shown in the
following illustration.
Xerox
®
Color 550/560/570 Printer13-32
User Guide
Standard/Booklet Maker Finisher

Table of Contents

Other manuals for Xerox Color 550

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox Color 550 and is the answer not in the manual?

Xerox Color 550 Specifications

General IconGeneral
Print Resolution2400 x 2400 dpi
Monthly Duty Cycle300, 000 pages
Duplex PrintingAutomatic
Supported Operating SystemsWindows, Mac OS, Linux
ConnectivityUSB 2.0, 10/100/1000Base-T Ethernet
Supported Media Typeslabels, envelopes
Paper SizeA4, A5
Printer TypeLaser
Print SpeedColor: Up to 50 ppm; Black: Up to 55 ppm

Related product manuals