4. Hold the tabs of the staple cartridge unit by the tabs and lift to remove it.
5. While holding the tabs of a new staple cartridge, push it into the unit.
6. Push the staple cartridge unit to its original position in the machine.
7. Close the Right Cover on the finisher.
Note
A message will display and the machine will not operate if the right cover is open even
slightly.
Replacing the Staple Waste Container on the finisher
The machine displays a message indicating that the Staple Waste Container is full. To
replace the container:
1. Make sure that the machine has stopped printing.
13-11Xerox
®
Color 550/560/570 Printer
User Guide
Standard/Booklet Maker Finisher
To Next Page
Loading...
