Specifications
Standard/Booklet Maker Finisher
SpecificationItem
Capacity: 500 sheetsTop Tray
Supported paper sizes: Maximum: SRA3, 13x19 in., 12.6 x 19.2
in., 330x488mm (custom size) Minimum: 100x148mm (SEF), 4x6
in. (SEF), A6 (SEF) postcards
Supported paper weight: 64-300 gsm
Transparencies: send to top tray of the finisher only; stacker middle
tray cannot accept
Collated / uncollated
Capacity: 2,000 sheets, 200 setsStacker (middle) tray
Supported paper sizes: Maximum: SRA3, 13x19 in., 330x488mm
(custom size) Minimum: B5, Executive (7.25 x 10.5 in.)
Supported paper weight: 64-300 gsm
Collated / uncollated (offset available)
Supported paper sizes: Maximum: A3/11 x 17 in. Minimum: B5,
Executive (7.25 x 10.5 in.)
Tray 8 (Post-Process Inserter;
also called “Interposer”)
The machine does not print on paper loaded in Tray 8.
Capacity: 200 sheets when using Xerox 20 lb./75 gsm paper.
Paper type: 64-220 gsm
Capacity: minimum 30 sheetsOptional C/Z Fold tray
Supported paper weight: 64-90 gsm
Supported paper sizes: A4 (SEF) and 8.5x11 in. (SEF)
Maximum number of sheets:
• Fold and Staple: 25 sheets (64 - 79 gsm) (May need service
call to enable.)
• Fold only: 5 sheets
When using Xerox 20 lb./75 gsm paper, only 14 sheets can be
stapled if adding a cover. Paper sizes:
• Maximum: A3, 13 x 18 in.
• Minimum: A4 SEF, 8.5 x 11 in. SEF
Booklet Creation/Single Fold
Paper Type: Fold only or Fold and Staple: 64-220 gsm uncoated,
106-220 gsm coated up to 17 inches long.
Xerox
®
Color 550/560/570 Printer13-42
User Guide
Standard/Booklet Maker Finisher
To Next Page
Loading...
Need help?
General
