Replacing the Toner Cartridges
This procedure shows you how to remove a used toner cartridge and replace it with a
new toner cartridge. The machine will notify you when a new toner cartridge is needed,
and when installation is to occur. If you continue copying or printing without replacing
the toner cartridge, a message will appear and the machine will stop after copying or
printing around 1,800 pages for Black, or around 1200 pages for Cyan, Magenta and
Yellow.
Follow the disposal instructions for the old cartridge when you receive with the new
cartridge.
Warning
Before you begin the procedure, ensure that the machine has been allowed to cool down.
Failure to do so may result in burns if certain parts of the machine are touched.
1. Replace the toner cartridge while the machine is on. Open the toner cover, located
just above the machine front door.
2. Lay paper on the floor before removing the cartridge. This will allow any excess
toner to fall on the paper. Hold the handle of the color indicated in the message,
and gently pull it out.
Xerox
®
Color 550/560/570 Printer10-6
User Guide
Maintenance
To Next Page
Loading...
