Xerox DocuColor 252

102 Chapter 4 – Tools and Utilities
4. In the Text area, set the attributes of the text on the tabs:
a. (Optional) In the
Font list, select a font for the text on the tab.
b. (Optional) In the
Size list, select a font size for the text on the tab.
c. (Optional) Click the
Color button to change the font color for the text on
the tab.
d. (Optional) Click
Bold to make the text on the tab bold.
e. (Optional) Click
Italic to make the text on the tab italic.
f. (Optional) Click
Underline to underline the text on the tab.
g. Click the appropriate alignment button as shown in Table 11.
Table 11: Tab alignment buttons
h. (Optional) Under Offset, type offset values in the x and y boxes to adjust
the offset of text on the tab. The
x value moves the text horizontally
according to the alignment; the y value moves the text vertically.
i. (Optional) Select
Wrap text to automatically run the text onto the following
line when the entire text does not fit on one line.
j. (Optional) Select
Text on both sides to have the same text appear on both
sides of the tab.
k. In the
Direction area, select the appropriate direction for the text:
5. Click the
Content tab.
Portrait Landscape
Align Left
Align Center
Align Right
Note: The Direction options are available only for portrait jobs.