Xerox Phaser 6120 - Page 175

Configuring the Printer164
NetWare (IPX/SPX)
The Network/NetWare (IPX/SPX) window provides the following parameters
for configuration:
Item Description
Enable NetWare When selected, enables the NetWare settings.
Default: [Checked]
General
Parameters
Ethernet
Frame
Type
Sets the Ethernet Frame Type.
Choices: Auto, Ethernet 802.2, Ethernet 802.3,
Ethernet II, Ethernet SNAP
Default: Auto
Configuration Menu Equivalent:
MENU INTERFACE MENU/
ETHERNET/IPX/SPX/FRAME TYPE
Operating
Mode
Sets the operating mode.
Choices: Print Server, Remote Printer
Default: Print Server