Configuring the Printer
165
Print Server
Parameters
Print
Server
Name
Sets the print server name.
Range: Up to 64 characters
Default: KMBTxxxxxx (Where x’s are last 6 digits of
MAC Address of the printer).
Print
Server
Password
If the print server requires a password, enter the
password in this field.
Range: Up to 64 characters
Default: [Blank]
Validate
Password
Used to validate the password entered in the Print
Server Password field.
Range: Up to 64 characters
Print
Server
Mode
Sets the print server mode.
Choice: Bindery, Both, NDS
Default: NDS
Preferred
File Server
Sets the name of the preferred file server.
Range: Up to 47 characters
Default: [Blank]
Preferred
NDS Tree
Identifies the NDS tree.
Range: Up to 48 characters
Default: [Blank]
Preferred
NDS
Context
Identifies the NDS context.
Range: Up to 191 characters
Default: [Blank]
Print
Server
Polling
Rate
Sets the time interval (in seconds) that passes
between print server pollings.
Range: 1 - 65535 (in seconds)
Default: 1
Printer
Number
Allows you to assign a printer number for
identification purposes.
Range: 0 - 254
Default: 1
Save Changes Saves and applies any changes made.
Discard Changes If you made changes to any of the parameter
settings but do not wish to apply the changes,
selecting this button restores the last submitted
parameter settings.
Item Description