Index
Phaser 6600 and WorkCentre 6605
Service Manual
I-2
E
electrical components, 1-47
electrical properties, 1-60
Electrostatic discharge (ESD), 1-6
error code
fault isolation procedures, 2-177 to 2-229
Phaser 6600 list, 2-91 to 2-112
WC6605 list, 2-112 to 2-177
error history report, 2-90
error messages, 2-89 to 2-177
Exit Assembly
removal, 4-93
Exit Drive Assembly, 1-46
removal, 4-95
Exit Sensor, 1-46
F
fault isolation prodedures
level 1, 2-177 to 2-209
level 2, 2-210 to 2-224
other, 2-225 to 2-229
FAX
Board removal, 4-97
fault isolation procedure, 2-227
specifications, 1-80
Feed Roller Assembly
removal, 4-92
First Print Output Time, 1-68
Full Stack Sensor, 1-46
Fuser, 1-43
removal, 4-46
temperature adjustment, 6-23
fusing operation, 1-31
H
hard disk
erase, 2-15
removal, 4-100
test, 2-21
Hardware Kit, 5-62
harness routing
Drive Harness Assembly, 4-148
Main Harness Assembly, 4-149
SFP Top Harness Assembly, 4-150
Health and Safety Incident Reporting, 1-14, A-7
I
IIT Assembly, 1-50
image quality
specification, 1-71
troubleshooting, 3-1 to 3-25
troubleshooting chart, 3-3
image transfer, 1-31
Imaging Unit
CRUM, 1-54
life rating, 1-54
IP Board
removal, MFP, 4-104
removal, SFP, 4-102
K
Keys, Control Panel
functions, MFP, 1-25
functions, SFP, 1-24
L
labels, caution & warning, 1-8 to 1-13
Laser Unit
description, 1-36
removal, 4-10
M
Main Drive Assembly, 1-37
maintenance items
life, 1-54
MCU Board
removal, 4-98
mechanical properties, 1-61
menu map
Phaser 6600 user, A-6
service mode, 2-11
service mode, Phaser 6600, 2-11
WC6605 Fax/Scanner diag, 2-13
WC6605 printer diag, 2-12
To Next Page
Loading...
Need help?
General
Weight and Dimensions
