EasyManua.ls Logo

Xerox Versant 3100 Press - Paper Jams

Xerox Versant 3100 Press
170 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Stock Properties > Advanced Stock Setup
Recommended
Incremental Ad-
justment
Available RangeAdjustment Step
Increments
Default ValueOption / Setting
Moderate Down-
ward
Small)Upward
or Slight (Very
Medium Down-
ward
Small) Down-
ward
SevereDownward
Custom Curl
Correction:
Moderate
(Small) Up-
wardorModer-
ate (Small)
Downward
Custom Curl
Correction:
Medium Up-
ward or Medi-
umDownward
Custom Curl
Correction:
Severe (Large)
Upward or
Severe (Large)
Downward
Paper Jams
If a paper jam occurs, a fault screen displays a message on the press control panel
indicating in which area the jam is situated. Follow the instructions provided for clearing
the jam and resuming press operation.
For more information, refer to Fault Messages.
Paper Jam Information
Before clearing paper jams, always refer to Fault Information.
Warning
When removing jammed paper, make sure that no pieces of jammed paper are left in
the press. A piece of paper remaining in the press can cause fire. If a piece of paper is
stuck in a hidden area or paper is wrapped around the fuser unit or rollers, do not remove
it forcefully. You can get injured or burned. Switch off the press immediately and contact
the Customer Support Center.
7-29Xerox
®
Versant
®
3100 Press
User Guide
Troubleshooting

Table of Contents

Other manuals for Xerox Versant 3100 Press

Related product manuals