Xerox Versant 3100 Press User Manual

Note
For more information, refer to Obtaining Fault Information from the Press Touch Screen.
Detailed information and instructions about the correcting a fault is available by selecting
the Faults button on the Home screen. The Fault screen displays.
Find the code for the fault listed at the bottom of the Fault screen.
Troubleshooting Help
Locating the Press Serial Number
The press serial number can be accessed from either the press control panel or by locating
the serial number plate on the inside frame of the first feeder tray (Tray 1).
1. Press the Machine Status button on the press control panel.
2. From the Machine Status screen, ensure that the Machine Information tab is
displayed.
The press serial number is displayed under General Information.
3. If there is a loss of power and it is not possible to access the Machine Status screen,
the press serial number can also be found on the inside frame of the press near paper
Tray 1:
a) At the press, fully open paper Tray 1.
b) At the left of the feeder tray, on the press frame, locate the plate with the serial
number (SER#).
Calling for Service
1. Record any displayed fault codes.
For more information, refer to Faults Tab and Fault Messages.
2. Record the press serial number.
a) Select the Machine Status button at the press control panel.
b) From the Machine Status screen, select the Machine Information tab.
Xerox
®
Versant
®
3100 Press7-46
User Guide
Troubleshooting

Xerox Versant 3100 Press Specifications

General

Brand	Xerox
Model	Versant 3100 Press
Category	Printer
Language	English