Xerox Versant 3100 Press - Paper Jams in Trays 1-3; Paper Jams in Bypass (Tray 5)

Paper Jams in Trays 1-3
Note
Paper is sometimes torn and remains inside the press if you open a traywithout checking
the paper jam position. This may cause a malfunction. Check where the paper jam
occurred before clearing the problem.
1. Open the tray where the paper jam occurred.
2. Remove the jammed paper.
3. Push the tray in gently until it comes to a stop.
Paper Jams in the Bypass (Tray 5)
Paper Jams When the Bypass is Installed on Trays 6 and 7
Tip
Always ensure that all paper jams, including any small, ripped pieces of paper, are cleared
before proceeding with any print jobs.
1. Remove the paper currently loaded in the Bypass (Tray 5).
2. Lift and open the Top Cover of the Bypass (Tray 5).
7-39Xerox
®
Versant
®
3100 Press
User Guide
Troubleshooting