• Greater image registration variance may be experienced on envelopes.
• Maintain constant temperatures and relative humidity.
• Removal of the envelopes from the output top tray is recommended to minimize
poor stack quality and possible jams.
• Printed envelopes are sent only to the Offset Catch Tray (OCT) or to the top tray of
the standard finishers.
Supported Envelope Sizes
Feed DirectionHeight x Width DimensionsEnvelope Size
SEF3.875 x 7.5 in.Monarch
SEF4.125 x 9.5 in.#10
SEF / LEF229 x 324 mmC4
SEF / LEF162 x 229 mmC5
Loading Envelopes in Trays 6 and 7 with the Postcard Bracket
Note
Install the postcard bracket before printing envelopes.
1. Slowly open one of the paper trays until it stops and remove the paper.
2. Move the paper guides out to their largest position.
5-33Xerox
®
Versant
®
3100 Press
User Guide
Paper and Media