2. Remove the jammed paper.
Note
If paper is torn, check inside the machine and remove it.
3. Gently push in the tray until it comes to a stop.
OHCF (Trays 6 and 7) Paper Jams at Lever 1a and Knob 1c
1. Open the front cover of the feeder module.
2. Move the lever 1a to the right and turn the knob 1c to the right. Remove the jammed
paper.
Note
If paper is torn, check inside the machine and remove it.
3. Return the lever 1a to the original position.
4. Close the front cover of the feeder module.
Note
If the front cover of the feeder module is not completely closed, a message will appear
and the machine will not operate.
7-41Xerox
®
Versant
®
3100 Press
User Guide
Troubleshooting