Xerox Versant 3100 Press User Manual

Note
The printed sheets do not yet reflect the new settings but are the sheets that were
used to make the adjustments.
7. Decide if you want to visually check the new settings:
• You do not want to print sheets with the revised settings; therefore, select Save
and Close.
• You do want to print sheets with the revised settings; therefore, select the Sample
Printout button to view the adjustment prints.
Sample sheets print using the updated settings.
8. Check the printed samples for density uniformity / consistency.
• Verify that each line of color shows even density across the page, as shown in the
following illustration:
* Check for uniform, consistent density across all color bars as indicated by the
arrows in the above illustration.
If acceptable, select Save and Close.
• If the results are not acceptable, repeat the previous steps of this procedure.
9. Select Close to complete the Density Uniformity Adjustment.
Replacing Consumable Supplies
Note
Refer to www.xerox.com for the latest consumable part numbers.
The following items are the Customer Replaceable Units (CRU) for the press. It is
recommended that you have a supply of these items available to eliminate down time
when they need to be replaced.
• Dry Ink / Toner cartridges (C, M, Y, K)
• Drum cartridges (C, M, Y, K)
• An empty Waste Dry Ink/Toner bottle
• Trays 5, 6, and 7 feed rolls
• Suction Filter
6-9Xerox
®
Versant
®
3100 Press
User Guide
Maintenance

Xerox Versant 3100 Press Specifications

General

Brand	Xerox
Model	Versant 3100 Press
Category	Printer
Language	English