Xerox Versant 3100 Press User Manual

• Stock types include transparencies, heavyweight, coated and uncoated, hole-punched,
and tabs
• Loading paper Long Edge Feed (LEF) / portrait or Short Edge Feed (SEF) / landscape
(dependent on the actual paper size)
• Auto size detection capability
• Automatically adjusts the tray position in the front and back based on the paper size;
this is done once the tray is closed
Paper Tray Information for Trays 6 and 7
Note
Each feeder tray has a stock loading label. When loading media into the tray, refer to
the labels on the inside panel of the feeder tray for the correct orientation of that stock
type.
The specifications for each tray are:
• Maximum of 2,000 sheets of 24 lb. (90 gsm) uncoated paper; 2,100 sheets of 82 gsm
and 2,300 sheets of 64 gsm
• Paper weight range of 52 to 350 gsm
• Stock types include transparencies, heavyweight, coated and uncoated, hole-punched,
and tabs
Tip
Transparencies perform best when printed from Trays 6 and 7.
• It is recommended that you use Tray 5 (Bypass) to feed envelopes. However, Trays
6 and 7 may also be used for feeding envelopes.
- If you use Trays 6 or 7, envelopes must be fed either with the Postcard Bracket
or the optional Envelope Support Kit installed.
- If the Postcard Bracket is used, the stack height is limited to 200 envelopes.
Postcard Bracket
The postcard bracket is delivered with Trays 6 and 7 from manufacturing. The postcard
bracket allows you to print on smaller size media without requiring post-processing
cutting or sorting. The postcard bracket accommodates 4 x 6 in. (101.6 x 152.4 mm)
SEF media and smaller. For more information, refer to Paper Size Ranges.
Note
For more information, refer to Postcards.
Optional Envelope Support Kit
The Envelope Support Kit enables a greater quantity of envelopes to be loaded and
printed from Trays 6 or 7. This optional kit consists of two plastic pieces that fit into the
bottom of the tray and a postcard bracket that attaches to the side of the tray. The
plastic pieces lift one side of the stack of envelopes to offset the extra thickness of the
flaps. This keeps the stack level for feeding and enables more envelopes to be fed from
the tray.
Xerox
®
Versant
®
3100 Press5-6
User Guide
Paper and Media

Xerox Versant 3100 Press Specifications

General

Brand	Xerox
Model	Versant 3100 Press
Category	Printer
Language	English