Printing Tabs from the Print Server
1. From the print server, create and define the Tab stock for the paper tray you will be
using.
2. Load the Tab stock in Trays 1, 2, 3, 5, 6, 7, 8, 9, or T1 (optional Inserter). Refer to
Paper and Media chapter.
3. From the print server window, access the Held queue that contains your document.
Select the document you want to configure with tabs. Double click to open the file’s
properties.
4. Once all settings are made, select Print.
The press prints the complete set of tabs with the body pages defined. Any extra
tabs not used in the job are sent to the output tray.
3-5Xerox
®
Versant
®
3100 Press
User Guide
Print Job Submission
To Next Page
Loading...
