Xerox Versant 3100 Press - Printing Tab Stock

Tab Stock
Guidelines for Printing on Tab Stock
Always refer to the following guidelines before using tab stock:
• Tab Stock can be printed from all trays.
• Tabs are loaded in the tray only in the long-edge feed (LEF) direction.
• Tab stock is loaded so the straight edge of the stock is in the feed direction.
• You can load either single straight collated or single reverse collated tab stock.
• Refer to the print server documentation for more detailed information on how to set
up a tab job at your print server.
• If a jam occurs while running tabbed sets, cancel the job and start again.
• Before loading tab stock in a tray, program your tab job at the Stock Library Manager
application on the print server or from your print driver:
- Select Tab Stock or Precut Tabs as the Paper Type.
- Select the tray containing the stock as the Paper Source.
- Select the correct Paper Weight for the tabs, usually 163 gsm. The weight range
may be 106 to 176 gsm.
- Set Modules to the number of tabs in the set.
- For the stock size, set a Custom Size of 9 x 11 inches (229 x 279 mm) LEF.
- For the Print Output Order / Tab Sequence, select N to 1.
- For Output Delivery, select Face Up.
Xerox
®
Versant
®
3100 Press5-24
User Guide
Paper and Media