Xerox Versant 3100 Press User Manual

The paper Tray Properties window displays on the Stock Library Manager on the
print server. The Stock Library Manager is not available at the press.
Note
Do not load materials above the MAX line located on the guides.
7. From the Tray Properties window, verify that the correct paper information such as
size, type and weight are selected and match the stock loaded in the tray.
8. Select OK to save the information and close the Tray Properties window.
Matching the Tray and Stock Information
Important
To ensure maximum productivity and successful job completion, always verify that the
Tray Properties information (from the Stock Library Manager on the print server) matches
the actual stock / media that is loaded in the tray being used for the print job.
Before running a print job, check for any of the following conditions:
• Modifications were made to the Stock Library, such as
- Adding a stock,
- Copying a stock,
- Creating a new stock,
- Editing an existing stock
• Stock / media was loaded into the selected tray for the print job
• The tray selected for the print job was opened / closed
Note
If any of these conditions apply, verify that the Tray Properties information matches
the actual tray contents.
If the stock loaded in the tray does not match the information on the Tray Properties
window, then a message may be displayed in one or more of the following ways:
• On the User Interface of the press
• On the Stock Library Manager application (on the print server)
• On the print server
• On both the Stock Library Manager and the print server
• On the Stock Library Manager, the print server, and possibly on the press User Interface
Xerox
®
Versant
®
3100 Press5-14
User Guide
Paper and Media

Xerox Versant 3100 Press Specifications

General

Brand	Xerox
Model	Versant 3100 Press
Category	Printer
Language	English