Xerox Versant 3100 Press User Manual

The raised portion of the piece at the other end should be facing up, and on top
of the cork pad on the tray bottom.
7. Load the envelopes SEF on top of the plastic inserts, with the flaps closed and facing
down.
Note
The flaps should always be down and positioned along the front of the tray.
8. Adjust the paper guides against the stock.
9. Close the paper tray and confirm the new settings at the print server.
10. Run your print job.
11. Upon completion of your print job, remove the envelope stock and the envelope
supply kit components from the tray.
12. Place the envelope supply kit components into storage.
13. Store the remaining envelopes in their original packaging.
Loading Envelopes in Tray 5 (Bypass)
Load envelopes in Tray 5 in either the short edge feed (SEF) or long edge feed (LEF)
direction.
Loading Envelopes in Tray 5 in the SEF Direction
When loading envelopes SEF, ensure the flaps are closed and face down, and postion
the flaps along the front of the tray.
5-37Xerox
®
Versant
®
3100 Press
User Guide
Paper and Media

Xerox Versant 3100 Press Specifications

General

Brand	Xerox
Model	Versant 3100 Press
Category	Printer
Language	English