General Paper Loading Guidelines
• Fan paper before loading it in the paper tray.
• Do not overfill the paper trays. Do not load paper above the indicated maximum fill
line in the tray.
• Adjust the paper guides to fit the paper size.
• If excessive jams occur, use paper or other approved media from a new package.
• Do not print on label media after a label has been removed from a sheet.
• Use only paper envelopes.
• Print envelopes 1-sided only.
Unsupported Media
Some paper and other media types can cause poor output quality, increased paper jams,
or damage the press. Do not use the following:
• Rough or porous paper
• Inkjet paper
• Paper that is business-card size
• Paper that is folded or wrinkled
• Paper that is curled more than 0.47 in. / 12 mm
• Paper with cutouts or perforations
• Stapled paper
• Damp paper
• Thermal or heat-transfer paper
• Envelopes with windows, metal clasps, side seams, or adhesives with release strips
• Padded envelopes
Note
In addition to the above list, there may be other media that is not recommended or
supported. For details, please contact your local Xerox representative.
Xerox
®
Versant
®
3100 Press5-2
User Guide
Paper and Media
To Next Page
Loading...
