Xerox Versant 3100 Press - OHCF (Trays 6 and 7) Paper Jams at Lever 1 B and Knob 1 C; OHCF (Trays 6 and 7) Paper Jams at Lever 1 D and Knob 1 C

OHCF (Trays 6 and 7) Paper Jams at Lever 1b and Knob 1c
1. Open the front cover of the feeder module.
2. Move the lever 1b to the right and turn the knob 1c to the right. Remove the jammed
paper.
Note
If paper is torn, check inside the machine and remove it.
3. Return the lever 1b to the original position.
4. Close the front cover of the feeder module.
Note
If the front cover of the feeder module is not completely closed, a message will appear
and the machine will not operate.
OHCF (Trays 6 and 7) Paper Jams at Lever 1d and Knob 1c
1. Open the front cover of the feeder module.
Xerox
®
Versant
®
3100 Press7-42
User Guide
Troubleshooting