Xerox Versant 3100 Press - Full System Configuration; Power On and Off Procedures; Power Switches

Full System Configuration
Note
Full system configurations will vary depending on which optional devices are attached
to the press. For detailed information on optional devices, refer to the Optional Devices
Guide for Xerox
®
Versant
®
3100 Press.
The following illustration shows an example of a full system configuration with optional
devices attached; this is only one example.
6.1. High Capacity Stacker*Dual Advanced High Capacity Feeder
(Trays 8 and 9)*
7. Two-sided Trimmer*
2. Advanced High Capacity Feeder (Trays
6 and 7)
8. C/Z Folder*
9. Production Ready (PR) Booklet Maker
Finisher*
3. Color Press
4. Interface Decurler Module (IDM)*
10. SquareFold
®
Trimmer*
5. Inserter*
* Numbers 1 and 4-10 indicate optional devices.
Power On / Off
Power Switches
There are three power switches involved with the press:
• Circuit Breaker Switch
• Main Power Switch
• Power On / Off Button
Important
Always use the Power On / Off button first, and then power off the Main Power Switch.
Xerox
®
Versant
®
3100 Press2-8
User Guide
Getting Started