Xerox Versant 3100 Press - Page 72

3. To remove the postcard bracket, loosen the screw on the left side of the tray ( )
and remove the bracket ( ).
4. Install the postcard bracket:
a) Sit the bracket on the locating pins on the upper frame and in the grooves on
the bottom of the tray.
b) Tighten the thumb screw so it locks the postcard bracket in place.
5. Load the envelope either in the short-edge-feed (SEF) or long-edge-feed (LEF) direction:
• When loading envelopes SEF, ensure the flaps are closed and face down, and
postion the flaps along the front of the tray.
• When loading envelopes LEF, ensure the flaps are closed and face down, and
postion the flaps along the right of the tray.
Xerox
®
Versant
®
3100 Press5-34
User Guide
Paper and Media