Xerox Versant 3100 Press - Page 55

7. After the print job finishes, open the tray and return the rear paper-feed adjustment
lever to its default position by sliding it to the left.
Leave the tray open, and continue to the next step.
8. Retrieve and evaluate the printed output; choose one of the following:
• The paper is fed accurately without skew and the printed output is satisfactory.
Close the tray and your task is completed.
• The paper is skewed and the printed output is unsatisfactory; proceed to the next
step.
9. Adjust the right-side paper-feed lever:
a) On the tray, slide the right-side paper-feed adjustment lever toward the rear of
the tray.
b) Close the tray and verify the tray settings from the Stock Library Manager on
the print server.
c) Run your print job.
10. Retrieve and evaluate the printed output; choose one of the following:
• The paper is fed accurately without skew and the printed output is satisfactory;
perform the following:
1. Open the tray.
2. Return the right-side paper-feed adjustment lever to its default position
by sliding it toward the front of the tray.
5-17Xerox
®
Versant
®
3100 Press
User Guide
Paper and Media