Note
It is recommended that you run a few test prints before performing the cleaning
procedure. After the Start Cleaning button is selected, the system automatically
generates a test print. This allows you to compare the before and after prints for image
quality.
1. At the press control panel, log in as the administrator.
2. Press the Machine Status button.
3. Select the Tools tab.
4. Select System Settings > Common Service Settings > Maintenance.
5. Scroll through the Maintenance pages, and select Clean Toner.
6. Select the desired dry ink / toner colors to clean.
If desired, you can select all the toner colors.
7. Press Start.
After the purge page prints, a Successfully Completed message displays.
8. To ensure that the problem is resolved, select Sample Print.
9. Select Close repeatedly until the main Tools screen displays.
10. Exit the administrator mode.
Xerox
®
Versant
®
3100 Press6-6
User Guide
Maintenance
To Next Page
Loading...
