EasyManua.ls Logo

Yamaha Disklavier E3 - MIDI Device Connection

Yamaha Disklavier E3
197 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Media Management
English
8
Chapter
87
For Mac OS X 10.5 or later
Note:
[Dkv******] differs depending on
each Disklavier.
Click the [Finder] icon in the dock, and then select [Go]
and then [Network] from the menu bar.
The [Network] window appears. Confirm that the [Dkv******] icon is
shown in the [Network] window.
Note:
If the user ID and password are
required during the process, enter
any name for the ID and leave the
space for the password blank.
Click the [Dkv*******] icon.
The [Dkv*******] folder opens. Confirm that the [FromToPC] icon is
shown in the [Dkv******] folder.
Click the [FromToPC] icon.
The [FromToPC] folder opens.
Copy the desired song files to the [FromToPC] folder.
See Chapter 8 “Media Management
– Refreshing the Contents in
[FromToPC]” on page 88.
Refresh the contents in the folder.
2
3
4
5
For Macintosh: In case that you cannot find
the [Dkv******] icon
1. Press [SETUP] on the remote control.
2. Select “Network” in the setup menu screen.
3. Select “Information” to display the information of network
settings.
4. Press [ ] several times to display “NAME=DKV******” and
memorize that name.
5. Select [Go] and then [Connect to Server] from the menu bar on
the computer.
6. Enter the name confirmed in step 4 in the address field, and
then click [Connect]. Use syntax “smb://” when entering the
name (“smb://Dkv******”).
7. Select [FromToPC] from the mini-menu in the first window
appears and click [OK]. Click [OK] again in the next window that
appears.
8. Copy the desired song files to the [FromToPC] folder on the left
side of the finder window.
6

Table of Contents

Other manuals for Yamaha Disklavier E3

Related product manuals