Yamaha Scorpio - Rear Brake Inspection

6 - 9
CHAS
REAR WHEEL AND REAR BRAKE
4.Inspect:
●
Rear wheel clutch hub damper
Wear/damage
→
Replace.
REAR BRAKE INSPECTION
1.Inspect:
●
Brake shoes
Glazed parts
→
Sand with coarse sandpa-
per.
NOTE:
After using the sandpaper, clean of the pol-
ished particles with a cloth.
2.Measure:
●
Brake shoe thickness
a
Out of specification
→
Replace.
b
Measure point
Brake shoe thickness (limit):
1.0 mm
3.Inspect:
●
Brake shoe spring
Wear/damage
→
Replace.
4.Inspect:
●
Brake drum inner surface
Oil/scratches
→
Remove.
5.Measure:
●
Brake drum inside diameter
a
Out of specification
→
Replace.
Oil
Use a rag soaked in lacquer
thinner or solvent.
Scratch
Use an emery cloth (lightly
and evenly polishing).
Standard 130 mm
Wear limit 131 mm