Yamaha Scorpio - Tire Inspection; Steering Head Inspection

3 - 23
INSP
ADJ
TIRE INSPECTION/
STEERING HEAD INSPECTION
TIRE INSPECTION
1.Measure:
●
Tire inflation pressure
Out of specification
→
Adjust.
*
Load is the total weight of the cargo, rider, pas-
senger and accessories.
Basic weight (with
oil and full fuel
tank)
131 kg
Maximum load* 180 kg
Cold tire pressure Front Rear
Up to 100 kg load*
200 kPa
(2.0 kg/cm
2
)
200 kPa
(2.0 kg/cm
2
)
100 kg ~ maximum.
Load*
200 kPa
(2.0 kg/cm
2
)
225 kPa
(2.25 kg/cm
2
)
2.Inspect:
●
Tire surfaces
Wear/Damage
→
Replace.
1
Tread depth
2
Side wall
3
Wear indicator
Minimum tire tread depth (front
and rear):
0.8 mm
3.After a tire repair or replacement, be sure to
tighten the valve stem locknut
1
to specifi-
cation.
STEERING HEAD INSPECTION
1.Stand the motorcycle on a level surface.
N
OTE:
Stand the motorcycle on its centerstand.
2.Elevate the front wheel by placing a suitable
stand under the engine.