ENGINE OIL LEVEL INSPECTION/
ENGINE OIL REPLACEMENT
3.Check:
●
Engine oil level
The engine oil level should be between the
minimum level mark
a
and maximum level
mark
b
.
Below the minimum level mark
→
Add the
recommended engine oil to the proper level.
CAUTION:
Do not allow foreign materials to enter the
crankcase.
OTE:
Before checking the engine oil level, wait a few
minutes until the oil has settled.
Recommended oil:
Refer to the chart for the engine
oil grade
API standard
SE or higher grade
ENGINE OIL REPLACEMENT
1.Start the engine, warm it up for several min-
utes, and then turn it off.
2.Place a container under the engine oil drain
bolt.
3.Remove:
●
Engine oil filler bolt
●
Engine oil drain bolt
1
(along with the gasket)
●
Oil filter element drain bolt
2
(along with the gasket)
4.Drain:
●
Engine oil
(completely from the crankcase)