Yamaha Scorpio - Page 53

3 - 11
INSP
ADJ
ENGINE OIL REPLACEMENT
5.If the oil filter element is also to be replaced,
perform the following procedure.
*****************************************************
Replacement steps:
●
Remove the oil filter element cover
1
and oil
filter element
2
.
●
Check the O-rings
3
and replace them if
they are cracked or damaged.
●
Install the new oil filter element and the oil fil-
ter element cover.
È
Outside
É
Inside
*****************************************************
6.Check:
●
Engine oil drain bolt gasket
●
Oil filter element drain bolt gasket
Damage
→
Replace.
7.Install:
●
Engine oil drain bolt
(along with the gasket)
●
Oil filter element drain bolt
(along with he gasket)
T
R
.
.
Oil filter element cover bolt:
10 Nm (1.0 m • kg)
T
R
.
.
20 Nm (2.0 m • kg)
T
R
.
.
10 Nm (1.0 m • kg)
8.Fill:
●
Crankcase
(With the specified amount of the recom-
mended engine oil)
9.Install:
●
Engine oil filler cap
Quantity:
Total amount:
1.4 L
Without oil filter element
replacement:
1.2 L
With oil filter element replace-
ment:
1.3 L