OTE:
Always balance the wheel when a tire or wheel
has been changed or replaced.
WARNING
●
Never attempt even small repairs to the
wheel.
●
Ride conservatively after installing a tire
to allow it to seat itself properly on the
rim.
SPOKE INSPECTION AND TIGHTENING
1.Inspect:
●
Spokes
1
Bend/Damage
→
Replace.
Loose spoke
→
Retighten.
2.Tighten:
●
Spokes
CABLE INSPECTION
WARNING
Damage cable sheath may cause corrosion
and interfere with the cable movement. An
unsafe condition may result so replace
such cable as soon as possible.
1.Inspect:
●
Cable sheath
●
Cables (throttle, clutch and starter)
Damage
→
Replace.
T
R
.
.
Nipple:
0.6 m • kg
To Next Page
Loading...
