Yamaha Scorpio - Brake Shoe Plate Assembly; Rear Wheel Assembly

6 - 10
CHAS
REAR WHEEL AND REAR BRAKE
6.Inspect:
●
Brake shoe plate
1
Cracks/damage
→
Replace.
●
Brake camshaft
2
●
Camshaft hole
3
Scratches/excessive wear
→
Replace.
T******
BRAKE SHOE PLATE ASSEMBLY
1.Install:
●
Brake camshaft
1
●
Brake shoe wear indicator
2
***********************************************
Installation steps:
●
Set the camshaft with its punched mark
a
facing the direction as shown.
●
Align the projection
b
on the indicator with
the camshaft notch and install.
●
Check the proper position of the brake shoe.
***********************************************
2.Install:
●
Brake camshaft lever
1
Install the camshaft lever with its slit and the
indicator at right angle as shown.
T******
REAR WHEEL ASSEMBLY
1.Install:
●
Bearing
1
●
Spacer
2
Refer to the “FRONT WHEEL AND BRAKE
DISC” section.