Yamaha Scorpio - Master Cylinder Removal; Master Cylinder Inspection

6 - 20
CHAS
FRONT BRAKE
EAS00588
MASTER CYLINDER REMOVAL
NOTE:
Before removing the front brake master cylin-
der, drain the brake fluid from the entire brake
system.
1.Remove:
●
Brake lever/compression spring
●
Brake switch
1
2.Remove:
●
Union bolt
2
●
Copper washers
●
Brake hose
3
NOTE:
To collect any remaining brake fluid, place a
container under the master cylinder and the
end of the brake hose.
3.Remove:
●
Master cylinder holder
●
Brake master cylinder
EAS00592
MASTER CYLINDER INSPECTION
The following procedure applies to the both of
the brake master cylinders.
1.Check:
●
Brake master cylinder
1
Damage/scratches/wear
→
Replace.
●
Brake fluid delivery passages
2
(brake master cylinder body)
Obstruction
→
Blow out with compressed air.
2.Check:
●
Brake master cylinder kit
1
Damage/scratches/wear
→
Replace.