YASKAWA FS100 - Page 108

2 INFORM Explanation
FS100 2.3 Operating Instruction : SET
2-85
4. Double precision type constant /B Variable number /
LB Variable number /B [Array number] /LB [Array
number] /I Variable number /LI Variable number /I
[Array number] /LI [Array number] /D Variable num-
ber /LD Variable number /D [Array number] /LD
[Array number] /R Variable number /LR Variable
number /R [Array number] /LR [Array number]/
Expression
When a D Variable number, LD Variable number, D [Array number], or LD
[Array number] is selected from the table in part 1 of this Explanation,
choose one of the tags from the following table.
No Tag Explanation Note
21 Double precision
type constant
Specifies the double precision type constant. < Data 2>
22 B Variable number/
LB Variable number/
B [Array number]/
LB [Array number]
Specifies the number of the byte type variable. < Data 2>
23 I Variable number/
LI Variable number/
I [Array number]/
LI [Array number]
Specifies the number of the integer type variable. < Data 2>
24 D Variable number/
LD Variable number/
D [Array number]/
LD [Array number]
Specifies the number of the double precision type
variable.
< Data 2>
25 R Variable number/
LR Variable number/
R [Array number]/
LR [Array number]
Specifies the number of the real type variable. < Data 2>
26 Expression Specifies the expression. <Data 2>
For details of setting the
expression, refer to
chapter 1.4
“Registration of
Expression” at page 1-8.