YASKAWA FS100 - Setreg

2 INFORM Explanation
FS100 2.3 Operating Instruction : SETREG
2-152
SETREG
Copies the specified integer type variable data into the register.
1. MREG# (Register number)
2. LOW/HIGH
SUBSET STANDARD EXPANDED
Not available Available Available
Function
Construction
I/LI/I[]/LI[]
SETREG
1
LOW/HIGH
2
(
)
A
Register No.
MREG
#
Integer type
constant
3
Variable No.
A END
4
Explanation
No. Tag Explanation Note
1 MREG# (Register
number)
Specifies the register number to save the data. No.: 0 to 599
Variable B/I/D/LB/LI/LD
can be used.
No. Tag Explanation Note
2 LOW/HIGH Specifies when copying the data into the lower/higher 8
bits of the register.