YASKAWA FS100 - Instruction Set; Selecting Instruction Set

1 Outline of INFORM
FS100 1.1 About INFORM
1-2
1.1.3 Instruction Set
To improve operation efficiency, the number of instructions to be
registered is limited. All instructions are executed, regardless of the
instruction set during playback, etc.
• Subset Instruction Set
Only high instructions which are used frequently are in the subset
instruction set. The number of instructions is small, which allows for
easier selecting and input.
• Standard Instruction Set / Expanded Instruction Set
All INFORM III instructions can be registered. For these two sets,
the number of additional items which can be used by each instruc-
tion is different. The following function cannot be used with a stan-
dard instruction set, but operation is easier because the number of
data decreases when the instruction is registered.
• Local Variable, Use of Array Variable
• Use of Variable to Additional Item (Ex.: MOVJ VJ=I000)
1.1.3.1 Selecting Instruction Set
Select an instruction set in the teaching condition window.
1. Select {SETUP} under the main menu
2. Select {TEACHING COND}
– The teaching condition window appears.
3. Select “LANGUAGE LEVEL”
– The instruction set selection dialog box appears.
DATA
EDIT
DISPLAY
UTILITY
Main Menu
Short Cut
TEACHING CONDITION
MRESET
RECT/CYLINDRICAL
LANGUAGE LEVEL
INSTRUCTION INPUT LEARNING
MOVE INSTRUCTION SET
STEP ONLY CHANGING
RECT
SUBSET
VALID
LINE
PROHIBIT
DATA
EDIT
DISPLAY
UTILITY
TEACHING CONDITION
RECT/CYLINDRICAL
LANGUAGE LEVEL
INSTRUCTION INPUT LEARNING
MOVE INSTRUCTION SET
STEP ONLY CHANGING
RECT
SUBSET
LINE
PROHIBIT
STANDARD
EXPANDED