YASKAWA FS100 - Gete

2 INFORM Explanation
FS100 2.3 Operating Instruction : GETE
2-132
GETE
Stores the element of position type variable of Data 2 in Data 1.
GETE <Data 1> <Data 2> (Element number)
1. D Variable number/LD Variable number/D [Array
number]/LD [Array number]
Add the following tag.
SUBSET STANDARD EXPANDED
Not available Available Available
Function
Construction
P/LP/P[]/
LP[]
Variable No.
BP/LBP/
BP[]/
LBP[]
Variable No.
EX/LEX/
EX[]/
LEX[]
Variable No.
Variable No.
D/LD/D[]/
LD[]
(
Variable No.
)
GETE
END
1 2
3
4
5
A
A
Explanation
No. Tag Explanation Note
1 D Variable number/
LD Variable number/
D [Array number]/
LD [Array number]
Specifies the number of the double-precision type
variable where the element of position type variable is
stored.
<Data 1>