YASKAWA FS100 - 8.4 System Monitoring Time Display

2 INFORM Explanation
FS100 2.2 Control Instruction : PAUSE
2-52
PAUSE
Stops the job temporarily.
1. IF
The following tag can be added or omitted.
(1) PAUSE IF IN#(12)=ON
Stops the job temporarily if general-purpose input signal number
12 is ON.
SUBSET STANDARD EXPANDED
Not available Available Available
Function
Construction
PA USE
IF
END
1
Explanation
No Tag Explanation Note
1 IF Specifies the IF instruction. Refer to chapter 2.6
“Instruction Which
Adheres to an
Instruction” at
page 2-208.
Example