YASKAWA FS100 - Registration of Expression; Expression

1 Outline of INFORM
FS100 1.4 Registration of Expression
1-8
1.4 Registration of Expression
1.4.1 Expression
With INFORM III, an expression can be added to the SET instruction.
< Example >
Register an expression in the DETAIL EDIT window.
The DETAIL EDIT window for expression is shown below.
Starting parentheses
Move the cursor to the parentheses, and press [SELECT]. Each time
[SELECT] is pressed, three types of parentheses show up in the follow-
ing order.
- (negative)
Move the cursor to the desired position, and press [SELECT]. Each
time [SELECT] is pressed, the negative is alternately added and omitted
and vice versa.
SET B000 ( B001 + B002 ) / B003 - ( B004 + B005 ) * B006
Result stored destination Expression
SUPPLE
-MENT
Expressions can be registered only when “STANDARD” or
“EXPANDED” has been selected for the language level
(instruction set).
EXPRESSION ( DATA SEL.TYPE ) OPERATOR
JOB
EDIT
DISPLAY
UTILITY
Main Menu Short Cut
DETAIL EDIT
- (negative)





Data
Data type selection icon
Ending parentheses
Starting parentheses
DATA01
DATA02
DATA03
DATA04
DATA05
DATA06
DATA07

Operator
=>
-(((
-
1234567890123
))) +