2 INFORM Explanation
FS100 2.6 Instruction Which Adheres to an Instruction : IF
2-211
2. =
When an IN#(Input number) is selected from the table in part 1 of this
Explanation, add the following tag.
3. B Variable number /LB Variable number /B [Array
number] /LB [Array number] /ON /OFF
When an IN#(Input number) is selected from the table in part 1 of this
Explanation, choose one of the tags from the following table after the
equal sign (=) is added from the table in part 2 of this Explanation.
4. =/<>
When an IG#(Input group number) is selected from the table in part 1 of
this Explanation, choose one of the tags from the following table.
No Tag Explanation Note
7 = It is equal.
No Tag Explanation Note
8 B Variable number/
LB Variable number/
B [Array number]/
LB [Array number]
Specifies the byte type variable which becomes a
comparison condition.
<Comparison element 2>
Least significant bit:
0: OFF
1: ON
9 ON/OFF The comparison condition is specified as ON or OFF. <Comparison element 2>
No Tag Explanation Note
10 = It is equal.
11 <> It is not equal.
To Next Page
Loading...
