YASKAWA FS100 - 6.2 Recommended Spare Parts

2 INFORM Explanation
FS100 2.1 I/O Instructions : ARATION
2-16
3. V=Basic speed
The following tag can be added or omitted.
4. OFV=Offset voltage
The following tag can be added or omitted.
No. Tag Explanation Note
3 V=Basic speed Specifies the speed at which the set voltage value is
output.
Speed: 0.1 to 1500.0
mm/s.
Variable B/I/D/LB/LI/LD
can be used. (Units: 0.1
mm/s.)
No. Tag Explanation Note
4 OFV=Offset voltage Specifies the analog voltage to be output at the
motion speed “0”.
Voltage value:
-10.00 to +10.00 V
Variable I/LI/I[]/LI[] can
be used.
(Units: 0.01 V)