Parameter List
1
1.13 o: Keypad-Related Settings
YASKAWA TOEPYAIGA8002B GA800 Drive Programming 101
No.
(Hex.)
Name Description
Default
(Range)
Ref.
o1-40
(11BD)
RUN
Home Screen Display
Selection
Sets the monitor display mode for the Home screen. This parameter is only available when
using an LCD keypad.
0 : Custom Monitor
1 : Bar Graph
2 : Analog Gauge
3 : Trend Plot
0
(0 - 3)
515
o1-41
(11C1)
RUN
1st Monitor Area
Selection
Sets the horizontal range used to display the monitor set in o1-24 [Custom Monitor 1] as a
bar graph. This parameter is only available when using an LCD keypad.
0 : +/- Area ( - o1-42 ~ o1-42 )
1 : + Area ( 0 ~ o1-42 )
2 : - Area ( - o1-42 ~ 0 )
0
(0 - 2)
515
o1-42
(11C2)
RUN
1st Monitor Area Setting
Sets the horizontal axis value used to display the monitor set in o1-24 [Custom Monitor 1]
as a bar graph. This parameter is only available when using an LCD keypad.
100.0%
(0.0 - 100.0%)
515
o1-43
(11C3)
RUN
2nd Monitor Area
Selection
Selects the horizontal range used to display the monitor set in o1-25 [Custom Monitor 2]
as a bar graph. This parameter is only available when using an LCD keypad.
0 : +/- Area ( - o1-44 ~ o1-44 )
1 : + Area ( 0 ~ o1-44 )
2 : - Area ( - o1-44 ~ 0 )
0
(0 - 2)
515
o1-44
(11C4)
RUN
2nd Monitor Area Setting
Sets the horizontal axis value used to display the monitor set in o1-25 [Custom Monitor 2]
as a bar graph. This parameter is only available when using an LCD keypad.
100.0%
(0.0 - 100.0%)
516
o1-45
(11C5)
RUN
3rd Monitor Area
Selection
Sets the horizontal range used to display the monitor set in o1-26 [Custom Monitor 3] as a
bar graph. This parameter is only available when using an LCD keypad.
0 : +/- Area ( - o1-46 ~ o1-46 )
1 : + Area ( 0 ~ o1-46 )
2 : - Area ( - o1-46 ~ 0 )
0
(0 - 2)
516
o1-46
(11C6)
RUN
3rd Monitor Area Setting
Sets the horizontal axis value used to display the monitor set in o1-26 [Custom Monitor 3]
as a bar graph. This parameter is only available when using an LCD keypad.
100.0%
(0.0 - 100.0%)
516
o1-47
(11C7)
RUN
Trend Plot 1 Scale
Minimum Value
Sets the horizontal axis minimum value used to display the monitor set in o1-24 [Custom
Monitor 1] as a trend plot. This parameter is only available when using an LCD keypad.
-100.0%
(-300.0 - +300.0%)
516
o1-48
(11C8)
RUN
Trend Plot 1 Scale
Maximum Value
Sets the horizontal axis maximum value used to display the monitor set in o1-24 [Custom
Monitor 1] as a trend plot. This parameter is only available when using an LCD keypad.
100.0%
(-300.0 - +300.0%)
516
o1-49
(11C9)
RUN
Trend Plot 2 Scale
Minimum Value
Sets the horizontal axis minimum value used to display the monitor set in o1-25 [Custom
Monitor 2] as a trend plot. This parameter is only available when using an LCD keypad.
-100.0%
(-300.0 - +300.0%)
516
o1-50
(11CA)
RUN
Trend Plot 2 Scale
Maximum Value
Sets the horizontal axis maximum value used to display the monitor set in o1-25 [Custom
Monitor 2] as a trend plot. This parameter is only available when using an LCD keypad.
100.0%
(-300.0 - +300.0%)
516
o1-51
(11CB)
RUN
Trend Plot Time Scale
Setting
Sets the time scale (horizontal axis) to display the trend plot. When you change this setting,
the drive automatically adjusts the data sampling time. This parameter is only available
when using an LCD keypad.
300 s
(1 - 3600 s)
517
o1-55
(11EE)
RUN
Analog Gauge Area
Selection
Sets the range used to display the monitor set in o1-24 [Custom Monitor 1] as an analog
gauge. This parameter is only available when using an LCD keypad.
0 : +/- Area ( - o1-56 ~ o1-56 )
1 : + Area ( 0 ~ o1-56 )
1
(0, 1)
517
To Next Page
Loading...
