YASKAWA GA800

3.4 Keypad Operation
570 YASKAWA TOEPYAIGA8002B GA800 Drive Programming
3. Push or to select [Parameter Backup/Restore], then push .
4. Push or to select the item to verify, then push .
5. Push or to select [Delete (keypad)], then push .
6. Push or to select the data to delete, then push .
The keypad will show the “End” message when the write process is complete.
◆ Check Modified Parameters
This procedure will show all parameters that were changed from their defaults as the result of Auto-Tuning or setting
changes. This helps find which settings have been changed, and is very useful when you replace a drive. This lets
users quickly access and re-edit changed parameters. If no parameters have been changed, the keypad will show “0
Parameters”.
1. Push (Home) to show the HOME screen.
Note:
• The keypad will show [Home] in the top right corner when the HOME screen is active.
• If [Home] is not shown on , push (Back) to show [Home] on .
2. Push (Menu).