10.4 Parameter Recording Table
10-37
Pn22A
0000 Reserved
−
Pn281
20 Reserved
−
Pn300
600 Speed Reference Input Gain Immediately
Pn301
100 Internal Set Speed 1 Immediately
Pn302
200 Internal Set Speed 2 Immediately
Pn303
300 Internal Set Speed 3 Immediately
Pn304
500 JOG Speed Immediately
Pn305
0 Soft Start Acceleration Time Immediately
Pn306
0 Soft Start Deceleration Time Immediately
Pn307
40
Speed Reference Filter Time Con-
stant
Immediately
Pn310
0000 Vibration Detection Switch Immediately
Pn311
100 Vibration Detection Sensibility Immediately
Pn312
50 Vibration Detection Level Immediately
Pn324
300
Moment of Inertia Calculating Start
Level
Immediately
Pn400
30 Torque Reference Input Gain Immediately
Pn401
100
Torque Reference Filter Time Con-
stant
Immediately
Pn402
800 Forward Torque Limit Immediately
Pn403
800 Reverse Torque Limit Immediately
Pn404
100 Forward External Torque Limit Immediately
Pn405
100 Reverse External Torque Limit Immediately
Pn406
800 Emergency Stop Torque Immediately
Pn407
10000 Speed Limit during Torque Control Immediately
Pn408
0000 Torque Related Function Switch
∗
Pn409
5000 1st Notch Filter Frequency Immediately
Pn40A
70 1st Notch Filter Q Value Immediately
Pn40B
0 1st Notch Filter Depth Immediately
Pn40C
5000 2nd Notch Filter Frequency Immediately
Pn40D
70 2nd Notch Filter Q Value Immediately
Pn40E
0 2nd Notch Filter Depth Immediately
Pn40F
5000
2nd Step 2nd Torque Reference Filter
Frequency
Immediately
Pn410
50
2nd Step 2nd Torque Reference Filter
Q Value
Immediately
Pn412
100
1st Step 2nd Torque Reference Filter
Time Constant
Immediately
Pn415
0 T-REF Filter Time Constant Immediately
Pn423
0000 Reserved
−
Pn424
50 Reserved
−
Pn425
100 Reserved
−
Pn456
15 Reserved
−
Pn460
0101 Notch Filter Adjustment Switch Immediately
Pn501
10 Zero Clamp Level Immediately
∗
The timing varies in accordance with the digit changed in a parameter (1st digit, 2nd digit, and so on). For details,
refer to
10.2.2 Parameters
.
(cont’d)
Parameter
Factory
Setting
Name
When
Enabled
To Next Page
Loading...
