3
Motion Module Setup
3.3.1
Module Configuration Definition
3-46
Refer to ( 2 ) Motion Setting Parameters under 8.2.2 Motion Parameter Settings for details on setting
parameter settings.
[ c ] Monitor Tab Page
The Monitor Tab Page displays the current values of the motion parameters. The parameters are only
displayed in the Monitor Tab Page; the settings cannot be changed here.
Input Data (Set Data)
Input (select) the parameter value.
Unit
Displays the units of the corresponding parameter.
Current Value
In online mode, the parameter's current value will be displayed. In
offline mode, nothing will be displayed.
Setting Details
INFO
WWW.NNC.IR
To Next Page
Loading...
