YASKAWA MP2200 User Manual

3
Motion Module Setup
3.2.1
Setup Method
3-26
3.2 SVA-01 Module Setup
This chapter explains the setup methods for the SVA-01 Module.
3.2.1 Setup Method
( 1 ) Settings Required for Setup
The following settings are required to set up the SVA-01 Module.
[ a ] Module Configuration Definition Settings
Defines the SVA-01 Module in the MPE720's Module configuration definition.
[ b ] Saving to Flash Memory
Be sure to save the settings to flash memory in the MP2200/MP2300 using the MPE720.
( 2 ) Allocation Method
Use either of the following two methods to allocate data for the SVA-01 Module.
• Self-configuration (automatic generation of definition files) (Refer to 3.2.2 Self-configuration.)
• Set in the MPE720 Module Configuration Definition Window (Refer to 3.2.3 Module Configura-
tion Definitions.)
3.2.2 Self-configuration
Self-configuration for the SVA-01 Module automatically recognizes all the MP2200/MP2300
Optional Modules, and automatically generates definition files. Self-configuration can be used to
reduce setup time.
WWW.NNC.IR

YASKAWA MP2200 Specifications

General

Brand	YASKAWA
Model	MP2200
Category	Controller
Language	English