YASKAWA MP2200

3.2
SVA-01 Module Setup
3-29
3.2.3 Module Configuration Definitions
This section explains the methods using the MPE720 for setting the SVA-01 Module's Module
configuration definitions and each of the other definitions.
( 1 ) Opening the Module Configuration Definition Window
The Module Configuration Definition Window can be opened from the File Manager or Engineering
Manager. Use the following procedure to open the window.
[ a ] Opening from File Manager
Double-click the Module Configuration File in the Definition Folder of the directory tree.
[ b ] Opening from Engineering Manager
Click File – Open – Definition – Module Configuration Definition.
Fig. 3.2 SVA-01 Module Configuration Definition Window
WWW.NNC.IR