v
Visual Aids
The following aids are used to indicate certain types of information for easier reference.
Indicates important information that should be memorized.
Indicates supplemental information.
Indicates application examples.
Describes technical terms that are difficult to understand, or appear in the text without an
explanation being given.
Indication of Reverse Signals
In this manual, the names of reverse signals (ones that are valid when low) are written with a
forward slash
(/) before the signal name, as shown in the following example:
• S-ON = /S-ON
• P-CON
= /P-CON
IMPORTANT
INFO
EXAMPLE
TERMS
WWW.NNC.IR
To Next Page
Loading...
Need help?
General
