viii
Safety Precautions
The following precautions are for checking products on delivery, storage, transportation,
installation, wiring, operation, maintenance, inspection, and disposal. These precautions are
important and must be observed.
• Before starting operation in combination with the machine, ensure that an emergency stop procedure
has been provided and is working correctly.
There is a risk of injury.
• Do not touch anything inside the MP2200/MP2300.
There is a risk of electrical shock.
• Always keep the front cover attached when power is being supplied.
There is a risk of electrical shock.
• Observe all procedures and precautions given in this manual for trial operation.
Operating mistakes while the servomotor and machine are connected can cause damage to the machine or even
accidents resulting in injury or death.
• Do not remove the front cover, cables, connector, or options while power is being supplied.
There is a risk of electrical shock.
• Do not damage, pull on, apply excessive force to, place heavy objects on, or pinch cables.
There is a risk of electrical shock, operational failure or burning of the MP2200/MP2300.
• Do not attempt to modify the MP2200/MP2300 in any way.
There is a risk of injury or device damage.
• Do not approach the machine when there is a momentary interruption to the power supply. When
power is restored, the machine may start operation suddenly. Provide suitable safety measures to
protect people when operation restarts.
There is a risk of injury.
• Do not allow installation, disassembly, or repairs to be performed by anyone other than specified per-
sonnel.
There is a risk of electrical shock or injury.
WARNING
WWW.NNC.IR
To Next Page
Loading...
Need help?
General
