YASKAWA SGDS-***12A Series User Manual

8.2 Normal Autotuning
8-11
8.2.5 Method for Changing the Machine Rigidity Setting
The machine rigidity setting is changed in utility function mode using parameter Fn001. The procedure is given
below.
This completes changing the machine rigidity setting for normal autotuning.
BB -FUNCTION-
Fn000
Fn001
Fn002
Fn003
BB
Machine Rigidity
Settings for
Online Autotuning
04
BB
Machine Rigidity
Settings for
Online Autotuning
06
Done
Machine Rigidity
Settings for
Online Autotuning
06
Operation Key DescriptionDisplay
Display the main menu of the utility function mode, and select

the utility function Fn001.
Press the Key.
Then, the screen changes to the execution display of the
machine rigidity setting (Fn001).
* If the screen does not change and NO-OP is displayed as the
status, a write prohibited password has been saved in Fn010.

Clear the write prohibited password if possible.
Press the or Key to select the machine rigidity.
Press the Key to write the specified rigidity to the
SERVOPACK.
* DONE appears as the status display when the write
processing has been completed.

YASKAWA SGDS-***12A Series Specifications

General

Brand	YASKAWA
Model	SGDS-***12A Series
Category	Amplifier
Language	English